Home › Failure Case Library › No PCR Product Detected
PCR (Polymerase Chain Reaction) critical

No PCR Product Detected

Symptom
Gel electrophoresis shows no visible band at the expected product size after PCR amplification, indicating complete reaction failure.
Common Causes
  1. 1 Incorrect annealing temperature preventing primer binding (typically >5°C above optimal Tm)
  2. 2 Poor primer design with self-complementarity, primer-dimer formation, or wrong target specificity
  3. 3 Insufficient primer concentration (<0.05 µM) or excessive concentration (>1 µM)
  4. 4 Missing critical reaction components (polymerase, primers, dNTPs, or template)
  5. 5 Suboptimal Mg²⁺ concentration or improper mixing of buffer and Mg²⁺ solution
  6. 6 Poor template quality with degradation, low 260/280 ratio, or presence of PCR inhibitors
  7. 7 Insufficient PCR cycles for low-copy templates
  8. 8 Thermocycler malfunction with incorrect temperatures or inconsistent block heating
Solutions
  1. 1 Test annealing temperature gradient starting at 5°C below the lower Tm of primer pair
  2. 2 Redesign primers: verify non-complementarity (internally and to each other), increase length, confirm target specificity
  3. 3 Optimize primer concentration between 0.05–1 µM according to product literature
  4. 4 Carefully repeat reaction setup ensuring all components are added
  5. 5 Optimize Mg²⁺ concentration in 0.2–1 mM increments; thoroughly mix Mg²⁺ solution and buffer before addition
  6. 6 Analyze template DNA quality by gel electrophoresis and check 260/280 ratio (should be 1.8–2.0)
  7. 7 Purify template by alcohol precipitation, drop dialysis, or Monarch® Spin PCR & DNA Cleanup Kit (NEB #T1130)
  8. 8 Increase PCR cycles incrementally; verify thermocycler calibration and program settings
Related Video (3)
Addgene ★ 82
Polymerase Chain Reaction (PCR) Protocol
"Walks through the actual PCR protocol step-by-step, so the viewer sees how annealing temperature is set and where a Tm mismatch causes failure."
YouTube (Curated Tutorials) ★ 75
Primer Design: Important Considerations and Tips for Good Primer Design
"Focuses on primer design considerations including Tm, which directly explains the top cause of an incorrect annealing temperature."
Bilibili (China-Accessible Mirrors) ★ 72
First-person PCR and gel electrophoresis demonstration
"Combines PCR benchwork with gel electrophoresis, mirroring the failure's detection step and showing the procedural context where no band appears."
Source: neb.com ↗
← Back to all cases