Puncturing out the pill-shaped blocks.

Assemble all necessary equipment including screwdriver, tweezers, razor blades, the pill-shaped blocks, and a sharpie for labeling.

Use a razor blade to carefully cut and incise the container holding the mold, then pry it open to separate the mold from the container using tweezers or fingers.

Position the screwdriver under the bottom of each desired block and firmly push or tap to extract the blocks from the mold, being careful as they may fly out.

Repeat the process of cutting the mold container with a razor blade and prying it open to access the coffin-shaped blocks.

Use a razor blade to make incisions between the coffin-shaped blocks along the mold, then carefully tear or separate the blocks using tweezers or fingers.