Home › Cell Biology › Aerosol-assisted Chemical Vapor Deposition of Metal Oxide Structures: Zinc Oxide Rods
Cell Biology JoVE (Open Access) Citable · DOI

Aerosol-assisted Chemical Vapor Deposition of Metal Oxide Structures: Zinc Oxide Rods

DOI: 10.3791/56127-v
What you'll learn
  • ✓ Prepare silicon, quartz, and polymer substrates for deposition
  • ✓ Formulate zinc precursor solution for aerosol generation
  • ✓ Operate aerosol-assisted CVD to grow ZnO rods
  • ✓ Characterize ZnO rod morphology via SEM analysis
Protocol

Biopharma Insights Columnar zinc oxide structures in the form of rods are synthesized via aerosol-assisted chemical vapor deposition without the use of pre-deposited catalyst-seed particles. This method is scalable and compatible with various substrates based on either silicon, quartz or polymers.

Difficulty
advanced
Total time
~4-6 hrs/sample

Steps

1
Prepare substrates and set deposition temperature

Clean silicon, quartz, or polymer substrates and configure the furnace to the desired deposition temperature for ZnO growth.

▶ 00:51
2
Prepare zinc precursor solution for aerosol

Dissolve the zinc precursor in solvent to create a homogeneous solution suitable for ultrasonic aerosol generation.

▶ 02:08
3
Perform aerosol-assisted chemical vapor deposition

Introduce the aerosol into the heated CVD chamber, allowing zinc oxide to deposit as rod structures on the substrate.

▶ 03:02
4
Characterize deposited zinc oxide rods

Analyze the morphology and structure of the ZnO rods on silicon substrates using scanning electron microscopy.

▶ 04:00
💬 Comments coming soon