Home › Analytical Chem › Determining the Chemical Composition of Corrosion Inhibitor/Metal Interfaces with XPS: Minimizing Post Immersion Oxidation
Analytical Chem JoVE (Open Access) Citable · DOI

Determining the Chemical Composition of Corrosion Inhibitor/Metal Interfaces with XPS: Minimizing Post Immersion Oxidation

DOI: 10.3791/55163-v
What you'll learn
  • ✓ Prepare carbon-steel substrates in inhibited acid solution
  • ✓ Transfer samples to XPS chamber without oxidation
  • ✓ Acquire and interpret XPS spectra of inhibitor films
  • ✓ Identify and minimize post-immersion oxidation artifacts
Protocol

Biopharma Insights A protocol to avoid the oxidation of metallic substrates during sample transfer from an inhibited acidic solution to an X-ray photoelectron spectrometer is presented.

Difficulty
advanced
Total time
~2–3 hrs/sample plus overnight pump-down

Steps

1
Prepare substrate in inhibited acid solution

Immerse the carbon-steel substrate in the inhibited acidic solution to form the corrosion inhibitor film at the metal interface.

▶ 01:16
2
Transfer sample to XPS analysis chamber

Move the sample from the acidic solution into the XPS instrument while preventing oxidative alteration of the inhibitor/metal interface.

▶ 01:57
3
Acquire XPS data

Collect X-ray photoelectron spectra to determine the chemical composition of the inhibitor/metal interface.

▶ 04:03
4
Analyze representative XPS spectra

Review representative XPS data from carbon-steel samples to confirm minimal post-immersion oxidation.

▶ 05:12
💬 Comments coming soon