Home›Analytical Chem›Evanescent Field Based Photoacoustics: Optical Property Evaluation at Surfaces
Analytical ChemJoVE (Open Access)Citable · DOI
Evanescent Field Based Photoacoustics: Optical Property Evaluation at Surfaces
DOI: 10.3791/54192-v
What you'll learn
✓Set up an evanescent field photoacoustic system
✓Align optics for total internal reflection
✓Perform TIRPAS and OTPAS measurements
✓Estimate refractive index and thickness
Protocol
Biopharma Insights Here we present a protocol to estimate material and surface optical properties using the photoacoustic effect combined with total internal reflection. This technique evanescent field-based photoacoustics can be used to create a photoacoustic metrology system to estimate materials' thicknesses, bulk and thin film refractive indices, and explore their optical properties.
Difficulty
advanced
Total time
~2-4 hrs/sample
Steps
1
Set up the EFPA system
Assemble the photoacoustic detection and total internal reflection optical components on the optical bench.
▶ 00:36
2
Initialize and align the optics
Power on the EFPA system and align the laser beam to achieve total internal reflection at the prism interface.
▶ 03:21
3
Perform TIRPAS measurement
Acquire photoacoustic spectra using the total internal reflection photoacoustic spectroscopy configuration.
▶ 04:39
4
Perform PAS/TIRPAS refractometry
Measure refractive index by combining photoacoustic spectrometry with total internal reflection refractometry.
▶ 06:10
5
Perform OTPAS measurement
Acquire optical tunneling photoacoustic spectra to evaluate thin film optical properties.
▶ 07:40
6
Review representative results
Examine example data from TIRPAS, PAS/TIRPAS, and OTPAS to interpret material and surface properties.
▶ 08:43
7
Conclude and summarize findings
Summarize the capabilities of EFPA for estimating thickness and refractive indices.
▶ 09:53
💬 Comments coming soon
New protocols and pitfalls, in your inbox
A short email when we add notable lab videos and failure cases. No spam, unsubscribe anytime.